Product Description

The sprinkle is modified by high quality secondary chassis at home and abroad, which is suitable for all kinds of road sprinkles, spray, cooling, dust removal, flushing dust, can also be used on road maintenance, garden greening and emergency fire, transportation water, etc. The sprinkler is mainly composed of a car chassis, a tank, a water pump, a ball valve, and a water pipe, a sprinkler. Water pump, strip, ball valve is the national type of product, good performance, reliable work, high pressure, high flow, low fuel consumption, open music speaker switch, good music accompanied by you.

Note: Specific use of the actual product!

Tank volume 5 cubic meters - 20 cubic meters, can body adopts Q235 high quality national standard steel plate production, can body 4mm thick, the head is 4mm thick, the rising head, the head is large mechanical automatic welding, can body inside the tank belt wavy The separator to reduce the impact of the liquid in the can during travel; with 60/90 special sprinkler pump, pump into the pump out, with the front rush (the front rush left and right flush distance ≥ 18 meters), post-sprinkle (back left right Water distance ≥10 m), with high cannon (forming water column, hairy, hair shaped, high cannon range ≥ 30 meters), profile light, music speaker, with a car with a car, a set of car tools Two water pipes, warranty manuals, manual and all procedures.

I. Introduction to Work Principle and Structure

1. Car chassis This sprinkler is modified by Dongfeng Company or other well-known manufacturers. 2 type chassis used by each product

2, can body sprinkler can body structure, tank is elliptical or square, made of steel plate, the whole vehicle can body warehouse is 2-3 room, the lower end of the intermediate partition has a through hole, the bundle area has bootable effect. To reduce the impact of liquid in the cans of the car. The appearance is painted against rust paint and decorative paint.

3, can port assembly

Tank portions: The large cover is tightened by the bolt on the canned neck, and is connected by a avionics and a guard small cover, and the handle is pressed against the small cover clockwise. Reverse, after the ear is released, the small cap can be opened, and there is a hole of φ 30 on the large cover so that the pressure in the tank is substantially the same during the water supply process.

4, the striker with a special power strobe, pneumatic operation or manual operation of each model, the operation switch is backward, the power strobe enters the engagement position, and the water pump is driven by the drive shaft, the switch is back, the pump is stopped Work.

5. Pump self-suction impeller pump sprinkler special pump. The structural schematic diagram of the water pump uses maintenance.

6, the ball valve uses the valve used in the ball for the ball valve structure. The ball valve consists of a valve body adjusted a seat, a sealing ring, a ball, a valve stem handle, and the like, and the switch of the ball valve can be realized by the conversion handle, and the ball valve is tightened to rotary to achieve the requirements. The sprinkler is equipped with 7 φ50 stainless steel ball valve, which is used for sprinkling water. A φ50 aluminum alloy ball valve, 4 in the figure to control water or sprinkle, turn it on, and turn off when it is sprinkled. A φ65mm fire ball valve, which can be connected to the fire tape supply emergency fire extinguishing.

7, the water sprinkler is installed with a duck-shaped nozzle or round head in front of the car, and the rear is filled with cylindrical sprinkles, and the flowers are sprinkled. The rear of the car is equipped with a high shot spray gun. (Optional) water gauges are generally used to flush the street, start dust and cooling effect, and the water sprinkler can change the spray direction and angle of the water sprinkler with adjustment nozzle threads, and high shot guns can be used for urban and rural and emergency fire trucks. Role. Liantong nozzle can pour the dust rushed from the middle water sprinkler, and the role of cleaning air.

8, the striker does not take force

If the striker does not take force, you need to check whether the small pass shaft of the strip is rotated. If you don't turn, you have to check the trachea of the Power Switch here. If you don't fall off, you should take the trachea of the striker. Next, then pull down the handbrake, is there any gas? If there is no gas, you have to completely check the trachea; if there is a gas stream, you need to remove the power (below, the specific operation of the video and sales manager), remove the finger's O-ring:

Operation method: Before opening the power force, the vehicle air pressure must be more than 6 or more, and must turn the front rush, the fill or the gun, and the pressure is too high, and the pressure is damaged. Stepping on the clutch, open the striker switch, slowly release the clutch (40 must not be too fast, otherwise it will damage the striker or gearbox gear, if there is a vicinity response, step on the clutch turning off the striker, then Re-opening the power. There is an abnum may be that the gear gear is not completely biting. The switch is stopped after stopping. (If you need to travel, step on the clutch, first hang (1, 2 stops can be), then turn on the power switch, slowly loosely (will damage the power and gearbox), so that it hangs The gear is started. When the water pump is working, the vehicle throttle should not be too large, otherwise the pressure is too bad to damage the accessories.)